How to Replace Rear Brakes 2003-2008 Toyota Corolla

Buy Now!
New Brake Shoes from 1AAuto.com https://trq.video/ia-1ABPS03269

This video shows you how to install rear brakes on your 2003-2008 Toyota Corolla. For drum brakes and parking brakes, shoes will eventually need to be replaced.

This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• Pry Bar https://trq.video/oPB-1AXAA00020
• 21mm Socket
• Needle Nose Locking Pliers
• 1/2 Inch Impact Gun https://trq.video/oqp-1AXAA00252
• Torque Wrench https://trq.video/oawM-1AXAA00044
• Anti-Seize Grease
• Brake Grease
• Brake Parts Cleaner
• Gloves https://trq.video/oQ2-1AXSS00048
• M8x1.25
• Rust Penetrant
• Safety Glasses
• Floor Jack https://trq.video/oXi-1AXAA00068
• Hammer
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Toyota Corolla 9th Generation 2003-2008:    • Toyota Corolla 9th Generation 2003-2008  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.