How To Install Aluminum Stair Nose Trim

Installation method of Aluminum stair nose trim
Aluminum edge trim is used in stairs to protect the surface of the stairs from damage, prevent people from sliding up and down the stairs and injure people, and can decorate the stairs.

To install aluminum stair nose trim, you can follow these steps:
1. Measure across the front edge of the stair. Remove the aluminum stair edge from the packet. Use a hacksaw to cut it to the measurement
2. Apply nail-free glue to the back of the aluminum stair edge strip
3. Place the rail on the front of the step. It should be flush on both ends
4. Place a screw on the end of the cordless drill. Let the magnetic tip hold it in place
5. Drill a hole through each of the holes in the rail and into the stair tread
6. Insert a screw into each hole and tighten it with a screwdriver

Welcome to learn more about aluminum trim strip, feel free to contact us
https://www.shenghai-alu.com/applicat...
https://www.shenghai-alu.com/purpose/...
[email protected]
[email protected]