Apex Trigger Bar Kit Installation for the Sig Sauer P320

Apex's Scott Folk walks you through how to properly install the patented Apex Forward Set Trigger Bar Kit in the Sig Sauer P320 pistols.

Recommended Tools:
– Needle Nose Pliers
– Small 6oz to 8oz Hammer
– 3/32" Pin Punch
– A Roll of Tape (handy but not required)
– A Gun Grade Lubricant

Timecodes
0:00 - Intro
0:37 - Tools
0:57 - Remove Trigger Return Spring
1:11 - Remove Trigger Bar & Trigger
1:23 - Stock Parts vs Apex Comparison
1:53 - Remove Over-travel Stop Pin
2:18 - Install Apex Spring & Over-travel Stop
3:17 - Lubricate Apex Trigger & Trigger Bar Interface
3:29 - Reinstall Apex Trigger Body & Trigger Bar
3:56 - Reinstall Trigger Return Spring
4:46 - Function Check of Reassembled FCU
5:18 - Note On Engaging Slide Lock Lever
5:49 - Final Function Check of Reassembled Pistol

————————
SOCIAL LINKS
————————
FULL30: https://www.full30.com/channels/apext...
INSTAGRAM:   / apextactical  
FACEBOOK:   / apextactical  
TWITTER:   / apextactical  
GUNSTREAMER: https://gunstreamer.com/@ApexTactical

Customer Service Inquiries: [email protected]
© Apex Tactical Specialties