Скачать или смотреть LibGSM Generate MQTT Publish and Subscribe Code - GSM Library

This video provides a step-by-step guide on starting an MQTT SIMCom LTE project using the LibGSM Code Generator. It covers selecting the necessary modules, generating code, configuring GPIO and UART connections, updating project files, subscribing to topics, and publishing messages to this same topic. Received messages will be output on a serial channel. Additionally, by watching until the end, you’ll learn how to integrate heartbeat LED functionality and modify flashing routines based on specific MQTT messages that are received.

More information regarding the LibGSM library can be found on our website:
https://eitech.systems/libgsm-gsm-lib...

Video Chapters:

00:00 Introduction
01:12 Project Setup
04:20 Generate Code
06:20 Millisecond Since Function
06:52 GPIO Setup
07:55 UART Setup
08:39 Our Hardware Setup
09:30 GSM Manager File Setup
15:56 Main File Setup
16:40 MQTT Session Variables
20:48 Main Setup Routine
22:41 MQTT Session Setup
27:40 Main Loop Routine
31:05 MQTT Publish Function
32:36 LibGSM Polling Routine
33:35 ADC Status Pin Setup (If Required)
36:50 Verify and Upload
38:13 Publish MQTT Message
38:32 Event Handler
40:51 Video Complete (Additional Content)
41:45 Heartbeat LED Setup
47:02 Verify and Upload
47:24 Possible Error Codes
51:03 Adapt Output Based On Message
53:17 Verify and Upload
54:32 Receive Matching Message
55:35 Conclusion

Hardware Used In Video:

GSM Modem - Elecrow Crowtail-4G SIM A7670E Module
MCU - STM32F411 Black Pill Board