How to Replace Wheel Bearing & Hub Assembly 2003-2007 Honda Accord

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com https://trq.video/ib-1ASHR00118
New Wheel Bearing & Hub Assembly Set from 1AAuto.com https://trq.video/ia-1ASHS00424

This video shows you how to install a new wheel hub and bearing on your 2003-2007 Honda Accord. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

Estimated installation time for a professional technician is approximately: 54 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• 12mm Socket https://trq.video/ocj7-1AXAA00015
• 14mm Socket https://trq.video/ocj7-1AXAA00015
• 19mm Socket
• 32mm Socket https://trq.video/oet-1AAST00003
• 32mm 12-point axle nut socket
• Cutoff Wheel
• 1/2 Inch Impact Gun https://trq.video/ozT-1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet https://trq.video/ocjR-1AXAA00016
• Torque Wrench https://trq.video/obnz-1AXAA00044
• Engine Oil
• Gloves https://trq.video/obq7-1AXSS00048
• Safety Glasses
• Sandpaper
• Chisel https://trq.video/onJ-1AXAA00055
• Floor Jack https://trq.video/oaGd-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oasD-1AXAA00065
• Punch
• Rubber Mallet
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2003-2007 7th Gen:    • Honda Accord 2003-2007 7th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.