Скачать или смотреть How to make Touch sensor with BC547 transistor and breadboard | BC547 transistor | DeenuYogi MS

Hi viewers,
Welcome to my channel. In this interesting video, we are going to see how to make touch sensor project without touch sensor, instead of a touch sensor, I used non insulated thick wire. In this project , when we touch the non-insulated wire, the LED glows. The main parts of this project is BC547 transistor. A transistor is one of the basic building blocks of modern electronics. It is composed of semiconductor material usually with at least three terminals for connection to an external circuit. Then, I used breadboard . A breadboard is a widely used tool to design and test circuit. You do not need to solder wires and components to make a circuit .Instead, we have to connect the wires in the terminals and in the holes of the breadboard. You can simply understand it when you do some basic projects with it. You have to use solid core wire or jumper wires.
In summary,
This project uses touching the switch instead of pressing the switch. It is somewhat advanced.
The requirements are-
1.Solid core wires
2.Breadboard
3.LED
4.10K resistor
5.BC547 transistor
6.Non insulated solid core wire

To know about the pins of BC527 transistor,click the link below:-
https://drive.google.com/file/d/1h4a-...

To view my channel,click this link below,
   / deenuyogims  

Subscribe to my channel,
http://tiny.cc/SubscribeDeenuYogiMS

To see my other projects with BC547 transistor,click the link below-
*   • Darkness sensor with LDR and BC547 transis...  
*   • How to make waterlevel indicator system wi...  
#Touchsensor #ProjectswithBC547Transistor #Breadboard #Schoolprojects

0:00 introduction
0:10 Requirements
0:41 About BC547 Transistor
1:06 Connections
2:58 testing
3:20 End screen
Thank you