Скачать или смотреть Arduino Nano ESP32 Review + Project |📟

In this video i review the Arduino NANO ESP32 Board

Parts Used:
1x red LED
1x arduino nano esp32
1x 220 Ohm resistor
6x jumper wires
1x breaboard
1x USB-c to USB-a Cable
1x pushbutton

Code:

// constants won't change. They're used here to set pin numbers:
const int buttonPin = 2; // the number of the pushbutton pin
const int ledPin = 3; // the number of the LED pin

// variables will change:
int buttonState = 0; // variable for reading the pushbutton status

void setup() {
// initialize the LED pin as an output:
pinMode(ledPin, OUTPUT);
// initialize the pushbutton pin as an input:
pinMode(buttonPin, INPUT_PULLUP);
}

void loop() {
// read the state of the pushbutton value:
buttonState = digitalRead(buttonPin);

// check if the pushbutton is pressed. If it is, the buttonState is HIGH:
if (buttonState == LOW) {
// turn LED on:
digitalWrite(ledPin, HIGH);
} else {
// turn LED off:
digitalWrite(ledPin, LOW);
}
}

keywords:
#arduino #esp32 #arduino esp32 #esp32 wifi #esp32 bluetooth #wifi #bluetooth #iot #internetofthings #homeassistant #apple #arduinonanoesp32 #arudinonano #arduinonano #arduinomega #arduinouno