How To Replace Front Control Arm Bushing 2007-16 GMC Acadia

Buy Now!
New Control Arm Bushing Set from 1AAuto.com https://trq.video/ia-1ASFK03508
New Control Arm Bushing from 1AAuto.com https://trq.video/ia-1ASMX00435

Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself. This video shows you how to install a new control arm bushing on your 2007-2016 GMC Acadia.

• Check here for more videos on the 2007-16 GMC Acadia:    • GMC Acadia 2007-16 1st Generation  

This repair was done on a 2012 GMC Acadia Denali 3.6L and the process should be similar on the following vehicles:
2007 GMC Acadia
2008 GMC Acadia
2009 GMC Acadia
2010 GMC Acadia
2011 GMC Acadia
2012 GMC Acadia
2013 GMC Acadia
2014 GMC Acadia
2015 GMC Acadia
2016 GMC Acadia

Tools you will need:
• Pry Bar https://trq.video/oy-1AXAA00020
• 18mm Wrench
• 18mm Socket
• 22mm Socket https://trq.video/oi-1AXAA00266
• 24mm Socket
• Air Compressor
• Dead Blow Hammer
• Trim Tool Set https://trq.video/ou-1AXXX00006
• 1/2 Inch Impact Gun https://trq.video/og-1AXAA00252
• Torque Wrench https://trq.video/o2-1AXAA00044
• Floor Jack https://trq.video/oH-1AXAA00068

Subscribe:    / @trq  

Check out our playlist:
GMC Acadia 2007-16 1st Generation:    • GMC Acadia 2007-16 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.