Alfa Romeo 147 facelift projector installation

The facelift Alfa 147 has a different headlight as the standard 147. With this new shroud, the Medium Gatlin Gun, it looks very nice!
The 147 Alfa is facelifted in the end of 2004.

𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
Xenon: https://retrofitlab.com/products/alfa...
Halogen: https://retrofitlab.com/products/alfa...

𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:00 Heat the headlight for about 17 minutes and open it with a flat screw driver
0:20 Unscrew the bulb holder from the housing and also from the projector (when it's mounted)
0:44 Screw the Medium Gatlin Gun shroud on the projector with the included screws
1:06 Place the rubber ring on the tail to prevent vibrations, put it trough the reflector and align it with the included centric ring, after that secure it with the screw nut
1:38 Connect the bi xenon plug with the H1 high beam splitter for high lights from the projectors
3:24 Screw the bulb holder back on the tail, place the bulb into it and plug the two little plugs into the H7 connector
4:01 Don't forget to clean the lens and shrouds. Wipe out all fingerprints and dust
4:06 Press the glass back on the housing and heat it again for about 17 minutes in a carton box, after it's heated again press the glass further in the housing and be sure the sealing will close the edges
4:32 Final view Alfa 147 facelift with Mini H1 projectors

𝗜𝗻 𝘁𝗵𝗶𝘀 𝘃𝗶𝗱𝗲𝗼 𝘄𝗲'𝘃𝗲 𝘂𝘀𝗲𝗱:
• Aharon speedstart Canbus ballasts AMP
• Medium Gatlin Gun shrouds
• XB35 5500K H1 xenon bulbs
• T10 position lights to match up with the xenons
• H1 high beam splitter to activate the bi-xenon function

𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look

𝗧𝗵𝗶𝘀 𝗸𝗶𝘁 𝘄𝗶𝗹𝗹 𝗳𝗶𝘁 𝗼𝗻:
• Alfa Romeo 147 (2004 - 2010)

* Alfa Romeo 147 (2000 - 2004)    • Alfa Romeo 147 pre facelift | Bi-Xeno...  

𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
  / europeanheadlightcommunity  

𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook:   / retrofitlab  
Messenger: https://www.m.me/Retrofitlab/
Instagram:   / retrofitlab.com_official  
Our website: https://www.retrofitlab.com/

𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.

A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!

The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.

Do you have any questions? Do not hesitate to contact us, we are happy to help you out!

Good luck with your retrofit!

These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.