3D Print Your Own Nanoleaf Project! - Alexa, Hue and App integration

How to build a very smart and low cost geometric lighting system. This video is sponsored by PCBway. 👇 More info below 👇

Get your PCB from PCBway here: https://geni.us/GeoLeafPCB

Meet Geoleaf, my low cost and 3D printable version of Nanoleaf lighting panels. They can be arranged in any pattern to suit any space and thanks to the low cost of only around £3.40 a panel it won’t break the bank. They have built in Wifi control which is driven by the feature rich WLED firmware running on a Wemos D1 Mini.

I’ll show you step by step how to make your own.

Support future projects, see DIY Machines' Amazon Wish List: https://www.amazon.co.uk/hz/wishlist/...

List of items used in this project and where to find them:

■ 12v WS2811 LED’s (A 5 meter roll is enough for 12 panels): https://geni.us/WS2811-60
■ 10mm LED connectors - one per panel: https://geni.us/3Pin10mmLEDCable
■ 3D Printer Filament: https://geni.us/3DJake
■ Acrylic sheets (1 A4 sheet = 3 triangles. I used 3mm thick): https://geni.us/OpalFrostedA4Acrylic
■ DC to DC Buck converter (Mini 360): https://geni.us/Mini360
■ Logic Level Shifter (74AHCT125): https://geni.us/74AHCT125-LLS
■ ESP8266 Dev Board: https://geni.us/wemosD1
■ Plenty of M3x8 bolts: https://geni.us/NutsAndBolts
■ Barrel connector suitable for at least 5amps https://geni.us/HighAmpDCBarrel
■ 12v Power Supply (6 amp+): https://geni.us/12VPowerSupply6A
■ Dual T splice connectors (x2): https://geni.us/DualTSplice
■ 3D Printer Filament: https://geni.us/3DJake
■ Some 20AWG wire (0.8128mm in diameter): https://geni.us/20AWG
■ 3M Command Hanging Strips: https://geni.us/CommandStrips

(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)

■ Projects PCB: https://geni.us/GeoLeafPCB
Or optionally
■ PermaProto Board: https://geni.us/HalfPermaProto
■ Wago Connectors: https://geni.us/Wago221

If you're in the UK, Europe or USA you can order a pre-soldered PCB with the Wemos, Mini360 and Logic Converter already attached and configured here: https://www.etsy.com/uk/listing/10931...

Optional Square panels to enhance your project: https://www.etsy.com/uk/listing/10679...

==========

The WLED firmware can be downloaded from here:
https://install.wled.me/

3D printed parts, wiring diagrams, FAQ etc can be found here:
https://www.diymachines.co.uk/geoleaf...

Download 3D printable parts: https://www.prusaprinters.org/prints/...

Optional square panels available for a donation to the channel:
https://www.etsy.com/uk/listing/10679...

Discord server for project:   / discord  

==========

These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: https://geni.us/Bosch-Screwdriver

I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymac...

Prusa support my channel when you use that link at no cost to yourself. :)

=============

SAY THANKS:

Provide continual and dependable support through Patreon:
Support us on Patreon:   / diymachines  

Buy me a coffee to say thanks: https://ko-fi.com/diymachines

SUBSCRIBE:
■    / @diymachines  

INSTAGRAM:   / diy_machines  
FACEBOOK:   / diymachines  
ETSY: https://www.etsy.com/uk/shop/DIYMachines

==========
List of camera and lighting equipment I use:

Sony A7 III: https://geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
Aputure MC: https://geni.us/FAPGL
RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip


Disclaimer:
This video is shared for demonstration purposes only.