How to Replace Rear Lower Transmission Mount 2003-2007 Honda Accord 3.0L V6

Buy Now!
New Transmission Mount from 1AAuto.com https://trq.video/ia-1ATMT00094

This video shows you how to install a new made to fit TRQ transmission mount on your 2003-2007 Honda Accord 3.0L V6. Like many other load bearing parts on your vehicle, the transmission mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens.

Estimated installation time for a professional technician is approximately: 36 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• 14mm Wrench https://trq.video/oahq-1AXAA00010
• 14mm Socket https://trq.video/ocgS-1AXAA00015
• 3/8 Inch Drive Ratchet https://trq.video/ocgS-1AXAA00015
• Socket Extensions https://trq.video/ocgS-1AXAA00015
• Torque Wrench https://trq.video/obkd-1AXAA00044
• Gloves https://trq.video/obmy-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaEn-1AXAA00068

Subscribe:    / @trq  

Check out our playlist:
Honda Accord 2003-2007 7th Gen:    • Honda Accord 2003-2007 7th Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.