F-16 RC Jet Crazy Aerobatics + Touch & Go Practice !! ✈️ FMS 80mm EDF

I don't usually practice the tough & go maneuver with my rc airplanes... I guess I just don't have the habit because for many years I flew exclusively from a non paved runway and it was very taxing for the models to take-off and land repeatedly... but now that I fly from paved surfaces more often I thought I'd give it a go to further hone my landing and wheelie skills! :D

Furthermore, the FMS F-16 is a great jet to practice touch and goes because it sits in high alpha very stable... and it looks badass while doing so! :DD

I also took the chance to pull some more cobras, flat spins and square loops, so I hope you enjoy the show! :DDD

I'm flying the F-16 on my new Jeti transmitter with a REX6A gyro-integrated receiver, so I'm using stabilization only in pitch and roll, yaw is undamped, although I plan to upgrade to another receiver with more channels to fix that issue ;)

I also use a MUI200 current sensor, which helps making the most out of each and every flight!

So far I'm keeping the jet unpainted, in the plain grey military livery of the USAF but in the near future I will probably repaint it in the belgian XTM scheme from the 31st Tigers Squadron, which I had the pleasure to watch perform live back in 2022 and immediately fell in love with it! :)
Actually, that F-16 is probably the reason I decided I had to include a Viper in my fleet, hahaha! :D

This jet is truly outstanding as a scale model, with a plethora of scale details and with the possibility of installing a lot of ordnance, including fuel tanks, short and medium range missiles! That's also one of the reasons I wanted to get the jet... it looks gorgeous in the air showing off with all the underslung gear installed! Here, on the second flight I was already flying it with a couple of fuel tanks, but wait for it... because I loaded it even more heavily already on the third, fourth and fifth sorties! (Video coming soon!) :p

These were flights 37th and 38th on 'Skye', as I decided to kindly dub this airframe ;)

Pilot: RC4ever
Ground video: Luis Ibáñez
Airfield: RACBSA

F-16 SPECS:

Wingspan: 1000mm
Length: 1450mm
Flying Weight: 3500g aprox
Ducted Fan: 80mm, 12 blade
Motor: Brushless inrunner 3665 - KV2000
ESC: Predator 100A
UBEC: Turnigy 8-15A
Servos: (Replaced the stab servos and left everything else stock)
2x 13g VOTIK 9495 MG-D
7x 9g Stock digital metal gear
Receiver: Jeti REX6A Assist + FrSky 4ch SBUS Decoder
Current sensor: Jeti MUI200
Main battery: SMC HCL-HVP 6S 4400mAh
Receiver battery: Rhino 2S 610mAh

---------------------------------------------------------------------------------------------------------
You can also follow me on:
YouTube:    / airguardian  
Facebook:   / rc4ever  
Instagram:   / airguardian  
Twitter:   / rc4media  
Patreon:   / airguardian