Скачать или смотреть How to Install Raptor 5" Oval Nerf Bars

Raptor 5" Oval Nerf Bars http://www.realtruck.com/raptor-5-ova...

Raptor 5" Oval Nerf Bars provide style and functionality to your vehicle. In stainless steel or black. Stainless steel has fully welded end caps and black has plastic end caps. Wide stepping area for added safety. Stainless steel backed by limited lifetime warranty and black backed by 10 year warranty. Easy to install and no drilling is required. Sold in pairs.

Stay Informed and Sign Up:
http://www.realtruck.com/newsletter-s...

Subscribe to our Channel:    / realtruckcom  

Follow us on Facebook: http://www.realtruck.com/facebook/?ut...
Follow us on Twitter: http://www.realtruck.com/twitter/?utm...
Follow us on Google+: http://www.realtruck.com/gplus/?utm_c...



Give us a call at

Video Transcription:
Hey guys. John here with realtruck.com. Today we are going to be installing the Raptor five inch oval nerf bars, onto a RAM mega cab truck.

We've got our five inch Raptor oval nerf bars. These happen to be in reeled wheel length, they are also available in a cab length version. Ours are black, you can also get these in stainless steel. They come complete with all the mounting brackets hardware you need to get them on your truck. So let's get started.

I've got everything all set up here guys. The first thing we got to do is we got to remove our body mount bolts, and we are going to take this very front one out, and then we are going to take that very back one out so that we can put our brackets in here for our new raptor boards. Now that we have got our bolts out, we can go ahead and put our brackets on. What we are going to do is we are going to use our bolts that we have here with a washer and a lock washer, on them. But we also have this rubber washer that we are going to want to put in place up here, on the back side of our bracket. That way our brackets don't squeak up against our bushings.

Now that we have got our old bolts out, we can go ahead and mount up our brackets to hold our nerf bars on. What we are going to do is we are going to go ahead and set up out bolt. We are going to use the longer of the two bolts for the back. We have a lock washer, a flat washer and then the rubber washer. And what that rubber washer will do is it will keep this from squeaking up in here and all in all driving you a little crazy listening to it squeak. We are going to put these up here. We are just going to snug them a little bit down and leave them loose.

Now we are in the back of the vehicle, on the drivers' side. What we are going to do is we are going to go ahead and peel this tape up here. You can just discard this tape once you peel it off there. Then we are going to take our T bolt, we are going to slide it inside that slot that we found underneath that tape. This part can get a little tricky because if you drop this, fun times are abounding. Take your square plastic washer. You want to press that on over the bolt because that will hold that in place so that it doesn't fall down inside the body. Once we have that in place, we will go ahead and grab our rear bracket and attach that. 866-554-0581 Free shipping for orders over $100!