5 ideas to improve Main+Sub phase alignment with Smaart® [GSwSST35]

1. Improve SNR by reducing ambient noise and increasing test signal in the room.
2. Ground plane mic placement.
3. Increase averages in Smaart.
4. Add delay in Smaart to flatten phase trace.
5. Subtract delay in Smaart instead of adding delay to your output processing.

What are some of your ideas for improving this process?
Let me know in the comments.

Download my target traces: https://www.sounddesignlive.com/targe...
___
Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-s...
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsou...
___
Books on sound system tuning - https://www.sounddesignlive.com/audio...
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-a...
___
Be friendly
Facebook -   / sounddesignlive  
Twitter -   / nathandofrango  
LinkedIn -   / nathanlively  
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.

I am always open to suggestions and feedback so please comment on this video or contact me through my site.
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.