Скачать или смотреть Airmatic Burst Tester - Luftberstdruck - Prüfgerät

The touch screen is used to set the necessary parameters depending on test method (burst strength, bulging
height and/or pore detection). The sample is placed in
the burst tester and the start button is pushed, causing
the clamping bell and safety guard to lower, and the selected test procedure begins. First, the sample is clamped at the preset pressure and then air is blown under
the sample (aluminium foils) or into a rubber membrane
(filter papers), causing the sample to bulge, until it bursts,
to the preset bulge height, or until a pore is detected. According to requirements, the individual values, diagrams,
or statistics can be read from the touch screen.


More Information you will find on our website - https://www.frankpti.com