Jerky or Noisy Motor? Try this Motor Quick Fix!

All Scooterheads! Follow us on...
IG:   / falconpev  
FB: https://www.fb.com/falconpev

What happens when you installed a new motor and it runs jerky and very noisily? What happens when it is going in reverse instead? Watch this video for some tips on how to pair the motor to the controller...

Whether you are changing to a new motor or upgrading your motor on your scooter, you may need to configure the controller to the motor. A word of caution: not all motors require such configuration! Only high speed motors and high discharge controllers typically do like those in our links below...

Every motor comes with at least 3 main wires called phase wires which are the main wires that carry the current that drives the motor. The phase wires need to be configured carefully to the motor so that the motor is able to drive smoothly and in the right direction.

The pairing process is a process of trial and error as we have shown here requiring at most 6 combinations. However, once configured, you wouldn't have to bother with it anymore.

For our range of high speed motor, check out:
11 inch motors: https://www.falconpev.com.sg/products...
10 inch motors: https://www.falconpev.com.sg/products...

For our range of high discharge controllers, check out:
https://www.falconpev.com.sg/products...