Konnected Alarm Panel Interface v2 1 install video w/ Ademco VISTA series alarm system & SmartThings

Connect any wired alarm system to smart home platforms including SmartThings, Home Assistant, Hubitat, OpenHAB and HomeBridge with the Konnected Alarm Panel Interface Kits. This start-to-finish installation video shows you how to connect a wired alarm system in-parallel with the Konnected Alarm Panel using the Konnected Alarm Panel Interface Module.

Interface Kits are available in our affordable Starter Kits:
https://konnected.io/products/konnect...

Interface Kits are also available with the new Konnected Alarm Panel Pro featuring Ethernet and PoE capability:
https://konnected.io/products/konnect...

This video demonstration is using the Konnected Alarm Panel 12-zone Interface kit to connect an ADT Safewatch 3000 / Ademco VISTA 20P to SmartThings. The process is very similar for other types of alarm system panels and smart home platforms.

-- SKIP AHEAD: VIDEO TIMELINE --
0:42 - Quick functionality demo
1:07 - Alarm Panel Interface Module hardware overview
2:20 - Identifying wired zones
3:01 - Before you start
3:46 - Identify Alarm Panel Outputs
5:46 - Ademco VISTA limitation on Zone 1
7:20 - Moving Zone 1
7:59 - Wiring Zones in-Parallel with the Interface Module
8:56 - Connect VREF
11:11 - Connect Interface Module to Konnected Alarm Panel
13:16 - Tuning the Zones
16:06 - Connecting Programmable Outputs for Armed/Disarmed and Triggered status
18:08 - Connecting the Keyswitch Relay
19:56 - Keypad Programming Intro
22:21 - Reprogramming Zone 1
25:32 - Programming Outputs
32:20 - Programming the Keyswitch Zone
33:50 - Full Functionality Demonstration with SmartThings!