Скачать или смотреть Paint Sprayer DIY Priming the Wagner Control Pro How to Prime the Wagner

This is a short video on how to prime the Wagner control pro for painting. I am copying what I saw on another video, but since then I dont bother with water at the beginning, though flushing out the unit is ESSENTIAL at the end of the painting process!
Wagner is a well-known brand in the world of airless sprayers. Their airless sprayers are designed for both DIY enthusiasts and professional painters who want to achieve a high-quality finish on their painting projects. Before using a Wagner airless sprayer, it is important to properly prepare it for use. In this article, we will discuss the proper way to prepare a Wagner brand airless sprayer before use.

Step 1: Read the Manual

Before starting any work, it is always important to read the manual that comes with the product. The manual provides valuable information on the operation and maintenance of the airless sprayer. It also includes safety instructions, troubleshooting tips, and information on accessories and replacement parts. Reading the manual will ensure that you understand the operation of the sprayer and that you use it safely.

Step 2: Set up the Sprayer

After reading the manual, the next step is to set up the sprayer. This includes connecting the hoses and fittings, installing the spray gun and tip, and ensuring that the filters are in place. The airless sprayer should be set up on a flat and stable surface, and the power cord should be plugged into a grounded outlet. The sprayer should be located in a well-ventilated area away from any sources of ignition.

Step 3: Check the Fluids

Before using the airless sprayer, it is important to check the fluids. This includes the oil, which lubricates the pump, and the paint, which needs to be thinned to the correct consistency. The oil should be checked and topped up if necessary, according to the instructions in the manual. The paint should be thinned to the correct consistency using the recommended solvent, which is also listed in the manual.

Step 4: Prime the Pump

Priming the pump is an important step in preparing the airless sprayer for use. This ensures that the paint is properly circulated through the pump and that there are no air bubbles in the system. To prime the pump, the suction tube should be placed in a container of paint, and the sprayer should be turned on. The prime valve should be opened, and the pump should be allowed to run until a steady stream of paint flows from the spray gun. The prime valve should then be closed.

Step 5: Test the Sprayer

Before using the airless sprayer on your project, it is important to test it on a small, inconspicuous area. This ensures that the sprayer is working properly and that the paint is flowing evenly. The spray gun should be held at a distance of 6-8 inches from the surface, and the trigger should be pulled in a smooth, continuous motion. The paint should be applied evenly, without any drips or runs.

Step 6: Clean the Sprayer

After using the airless sprayer, it is important to clean it thoroughly. This prevents paint from drying in the system and clogging the spray gun and tip. The suction tube should be removed from the paint container, and the sprayer should be flushed with the recommended solvent, according to the instructions in the manual. The spray gun and tip should also be cleaned thoroughly using a brush and solvent.

Conclusion:

Preparing a Wagner brand airless sprayer for use is an important step in achieving a high-quality finish on your painting project. By following the steps outlined in this article, you can ensure that your airless sprayer is properly set up, primed, and tested before use. Remember to always read the manual, check the fluids, test the sprayer, and clean it thoroughly after use. With proper preparation, you can achieve a professional-looking finish on your painting project with your Wagner airless sprayer.