GoPro Karma Pairing Fix with some extra information

I have done another video on this topic as some people were not able to understand the process based on the other videos

Its worth watching this video as well
   • GoPro Karma Pairing Issue Fix  

This video is the same process but with a board missing one of the FB36 pads. It has a few close ups so you can see what I am doing.
   • GoPro Karma fixing the pairing issue ...  

The SD card image and burning tool can be found here https://drive.google.com/drive/folder...
Here is a video no how to burn the image to the SD card
   • DiskImager software Install and Write  

This video shows you how to build a board that you can boot off if you dot have a SD slot on your arm board.
   • GoPro Karma - making a board to boot ...  

These are the commands that are used within Putty
At the login prompt use the login name root

insmod /opt/sentinel/modules/mtd_write_enable.ko
dd-new if=/dev/mtdblock0 of=/home/backup/mtdblock0.bin conv=sync,noerror status=progress
flash_eraseall /dev/mtd0
nandwrite -p /dev/mtd0 /home/orig/mtdblock0.bin

I have also included the invite for Discord which can be used to ask question and obtain other information.

  / discord  

Here is a list of people who can help in different countries

  / 1413795696209319  

This process will not be within everyone's abilities but with the knowledge of what needs to be done it provides you with options.