Скачать или смотреть Does A Wet And Dry Vacuum Cleaner Wash Carpets.

Yes, you can use a wet and dry vacuum cleaner to clean dirty carpets. To get the desired output, you need to follow a five-step process.

The steps for cleaning your carpet with a wet and dry vacuum are as follows:

Step 1: Set Up Room
When cleaning your carpet, it is very important that you take the necessary precautions. To start with, make sure the room is dry. Otherwise, you’ll have a mess all over the room.

Next, remove the furniture so you can clean the areas you can’t reach. You may feel lazy to do it, but you’ll be pleased with the end result.

Step 2: Get Rid Of Dust & Stains
As a next step, you’ll need to clean the carpet of dust. This will simplify the cleaning process.

As soon as you have cleaned off the dust, it is time to remove the stains. The market is filled with stain removers. Pick one that’s best for you. However, make sure you read the instructions before using the stain remover.

Step 3: Spray Carpet Cleaner
Make sure you read the instructions on the carpet cleaner before applying it. Regardless of the cleaner you use, you still need to mix it with water.

Once you have mixed the solution, evenly apply it to the carpet. Make sure you don’t overwet it, or it’ll look flooded. Plus, ensure it’s wet enough that dirt can be scrubbed off.

Step 4: Scrub Off Carpet
Here comes the most important part of the entire process. This is also the hardest one because you’ll have to scrub the carpet with a scrub brush.

The dry and wet vacuum will be able to soak up dirt more easily if the carpet is scrubbed nicely. Furthermore, it will remove any leftover beer stains.

Step 5: Clean Carpet Using Dry Wet Vacuum
Dry and Wet vacuums are capable of having good suction if they are attached to a flat extension. Remove all the water and dirt from the carpet by sucking it up. This step can be repeated a few times until your carpet looks new again.

That’s it. Now you have to take care of your carpet to prevent it from aging prematurely.