How to Replace Rear Brakes 2007-2013 Mitsubishi Outlander

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1APBS03604

This video shows you how to install new, quality TRQ brake pads and rotors on your 2007-2013 Mitsubishi Outlander. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This process should be similar on the following vehicles:
2007 Mitsubishi Outlander
2008 Mitsubishi Outlander
2009 Mitsubishi Outlander
2010 Mitsubishi Outlander
2011 Mitsubishi Outlander
2012 Mitsubishi Outlander
2013 Mitsubishi Outlander

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oaY6/1AXAA00013
• Pry Bar http://1aau.to/oHC/1AXAA00020
• 14mm Socket http://1aau.to/oaZB/1AXAA00015
• 17mm Socket http://1aau.to/oaZB/1AXAA00015
• Brake Caliper Compressor Tool. Single Piston. Lever Style. http://1aau.to/oau/1AXAA00288
• Brake Caliper Hanger http://1aau.to/ogg/1AXAA00084
• Needle nose pliers http://1aau.to/ow9/1AXAA00051
• Needle nose pliers http://1aau.to/ow9/1AXAA00052
• 1/2 Inch Air Impact Gun http://1aau.to/onj/1AXAA00252
• 1/2 Inch Breaker Bar http://1aau.to/opr/1AXAA00078
• Ratchet http://1aau.to/obdy/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oaZB/1AXAA00015
• Torque Wrench http://1aau.to/oajB/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels http://1aau.to/owt/1AXSS00035
• Floor Jack http://1aau.to/oN4/1AXAA00068
• Hammer http://1aau.to/oKx/1AXAA00091
• Jack Stands http://1aau.to/oKJ/1AXAA00065
• Wheel Chocks
• Wire Brush http://1aau.to/opA/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Mitsubishi Outlander 2007-2013 2nd Generation:    • Mitsubishi Outlander 2007-2013 2nd Ge...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.