Hans Anchors and Communicator Installation

Getting set up for a 24 hrs of Lemons race. So I thought I'd share how I installed my Hans anchors and the helmet communicator (mic and speakers).

**Edit: video shows installing the Zamp Helmet speakers. I discovered before the race that the Zamp speakers have a stereo mic connector which is a loose fit in the connector for the Communicator. I ended up ordering helmet speakers from Raceceiver which have a mono plug and it would much better.

Hans Quick Click Anchors with nut washers for SA2010/older helmets
https://amzn.to/3glf3iO

Hans Sport III with Quick Click Anchors (there are a lot of options for Hans devices, this is just to get you started. Be sure to do your research to get what you needed.)
https://amzn.to/2Yom50g

Raceceiver Helmet Speakers (mono plug) - this is the one I used for the race
https://amzn.to/35PTsNR

Zamp Helmet Speakers (stereo plug) - loose connection with the microphone communicator listed below)
https://pitstopusa.com/i-23991285-zam...

Racing Electronics RaceTrac 4-Conductor Standard Flex Boom Helmet Kit w/ Coiled Cord
https://pitstopusa.com/i-20819816-rac...