How to Replace Front Control Arms with Ball Joint 2010-2014 Subaru Outback

Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com http://1aau.to/ia/1ASFK06205

This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2010-2014 Subaru Outback. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

Estimated installation time for a professional technician is approximately: 1 hour 54 minutes

This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

Tools you will need:
• Pry Bar http://1aau.to/oaaB/1AXAA00020
• 17mm Wrench http://1aau.to/oaeP/1AXAA00010
• 18mm Wrench
• 19mm Wrench http://1aau.to/oaeP/1AXAA00010
• 13mm Socket http://1aau.to/ocbM/1AXAA00015
• 14mm Socket http://1aau.to/ocbM/1AXAA00015
• 17mm Socket http://1aau.to/ocbM/1AXAA00015
• 18mm Socket
• 19mm Socket
• Dead Blow Hammer
• Pliers
• Wire Cutters
• Ratchet http://1aau.to/occV/1AXAA00016
• Torque Wrench http://1aau.to/obfm/1AXAA00044
• Gloves http://1aau.to/obcQ/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Chisel http://1aau.to/onq/1AXAA00055
• Floor Jack http://1aau.to/oaAx/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oanm/1AXAA00065
• Pole Jack
• Small Hook
• Wheel Chocks
• Wire Brush http://1aau.to/oyQ/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.