Скачать или смотреть Infinity Cutting Tools - Drillnado Drill Press Dust Collection System

Drillnado Drill Press Dust Collector System
More Info: https://www.infinitytools.com/boring-...
Facebook:   / infinitycuttingtools  
Twitter:   / infinitytools1  
Instagram:   / infinitytools  

The drill press station has always been one of the messiest corners of any workshop because traditional dust collectors can't get adequate suction close enough to the working end of the bit. By fully surrounding your drill press chuck and bit the Drillnado is able to capture almost all of the chips, dust, and spoil created by your drill press.

The Drillnado can connect to any existing dust collection system or shop vac and is able to attach to drill press quills up to 2.6" in diameter. The expandable housing can accommodate drill bits up to 1" in diameter, and additional housings can be purchased which will allow for use with bits up to 1-3/4" diameter.

Features Include:
• Expandable housing stretches to just above the cutting edge of the drill bit, resulting in maximum dust collection efficiency
• Works with drill bits up to 1" in diameter
• Purchase an additional housing and Drillnado can be used with bits up to 1-1/4" in diameter (item 115-121)
• Works on most floor model and benchtop drill presses with a quill diameter of less than 2.6”
• Bushings and shims included for use on drill presses with 2.6”, 2.54”, 2.16”, 2.05”, and 1.57” quill diameters
• Connects to a dust collection system or shop vac with a 2-1/4" or 2-1/2" fitting
• Housing quick-disconnects for fast bit changes

Uses in your shop:
• Hang up the broom and dustpan you keep next to the drill press for good
• Sucks up almost all dust and debris from your drill press table

Warning:
NOT to be used when cutting metal. Metal shavings will damage a dust collector's impeller.