2018-2022 Camry 2.5 Transmission Fluid Change

Fill plug: 24mm, 29 ft-lbs (39Nm)
Drain plug: 10mm hex, 15 ft-lbs (20Nm)
Level check plug: 6MM hex (hand tight only)

Quinn 1/2" Drive Torque Wrench: https://www.harborfreight.com/12-in-d...

This video doesn't cover the filter replacement, and this is not something you should typically have to replace, but I get questions on it in the comments so here is a link.
Filter and gasket kit: https://amzn.to/3RGJs18

1 gallon of Valvoline MaxLife ATF: https://amzn.to/3vL6isv
or
Toyota WS Fluid: https://amzn.to/46brxUA

Hand pump: https://amzn.to/3XDmUi4

Drain plug crush washer: https://amzn.to/3NpK88D

These are both the same scanner:
Innova 5610: https://amzn.to/3ZFN3hc
Zurich ZR15s: https://www.harborfreight.com/zr15s-o...
Target temp: 95F-113F (35C-45C)

1:06 accessing the fill plug
1:42 removing the fill plug
2:20 removing the drain plug and fill level tube, draining the fluid
3:26 reinstalling the fill level tube and drain plug
4:05 fluid type
4:41 refilling the transmission
5:14 installing the fill plug
5:50 accessing transmission temp
6:36 removing drain plug to set level
7:56 reinstalling the drain plug

As an Amazon Associate, I earn from qualifying purchases. For your convenience, I try to post links to everything I use in the video description. That's part of how I cover the costs of this channel. I appreciate your support buy using these links!!