Boat build part 9 - First time drive, and app setup

This is the last video in a series on how to build a bait boat.

In this video I have arrived at a water in France. Weather is not the best, although I had some sun in the morning and decided to put the boat to a test. The test drive was the first time this boat got into water and I had to check that it drove as expected. Result was really nice, I just had to tune the speed and lower the PWM for my brushless bait thrower. And as I just arrived I needed to get my baits out, then finalize app setup afterwards. App setup includes the how-to for the servo buttons to fit this boat build.

It turned out to be the right priority, got my first fish only an hour after putting out my baits ...

Videos in this series:
Part 1: Introduction and overview
Part 2: Preparing a pixhawk before we put it into the boat
Part 3: Walkthrough of the additional components bought and printed
Part 4: Building the upper hull (from parts to complete)
Part 5: Preparng the lower hull
Part 6: Lower hull installing components
Part 7: Combining upper and lower hulls and gluing
Part 8: How ArduPilot wiki tells you to prepare their autopilot
Part 9: [THIS VIDEO - ENDING THE SERIES}