Скачать или смотреть AUTOMATIC DESKTOP CLEANER | MADE USING ARDUINO | MINI-PROJECT

AN AUTOMATIC DESKTOP CLEANER IS A DEVICE WHICH BASICALLY DRAWS ALL KINDS OF MINUTE DUST PARTICLES PRESENT ON A EXCLUSIVE DESKTOP SURFACE WITHOUT ANY NEED OF COMMAND FROM THE USER BY DETECTING IF THE DISTANCE BETWEEN THE SURFACE AND THE PROJECT DECREASES TO A CERTAIN POINT.

THIS MINI-PROJECT WORKS ON THE PROPERTY OF ULTRASONIC WAVES AND BERMOULII’S PRINCIPLE.

The desktop cleaner works on the principle of Bernoulli's Principle, " Air will always flow from a high-pressure area to the low pressure area, to try to balance out the pressure".

This means that the dust particles present on the desktop will be drawn inside the desktop cleaner with the help of a fan, the dust particles will be trapped inside the desktop cleaner by creating a chamber around the fan.

The Automation we have added in this project is that through a Ultrasonic Sensor we will use the property of ultrasonic waves to measure the surface.

once the distance reduces to less than 15 cm, the microcontroller will give an HIGH singal of 5V to the DC motor through a L298N Motor Driver to turn on the motor, the Bernoulli's Principle begins and the desktop cleaner will starts the suction on the exposed surface.Once the distance is increased to more than 15 cm, the signal to the motor is cutted off and results in creating the idle position of the device.



repository - https://github.com/megazron/DesktopCl...

Editing Credits :
Karankumar Nevage