How to Replace Blend Door Actuator 2009-2014 Ford F-150

Buy Now!
New HVAC Blend Door Actuator from 1AAuto.com http://1aau.to/ic/1AZMX00490

This video shows you how to install a new blend door actuator from TRQ on your 2009-2014 Ford F-150. The temperature blend door actuator is the electric motor that is responsible for physically opening and closing the blend doors in your vehicle's HVAC system. If the actuator isn't working, then you won't be able to control the temperature of the air coming out of the vents!

This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150

Tools you will need:
• 8mm Wrench http://1aau.to/oh2/1AXAA00011
• 7mm Socket http://1aau.to/obbk/1AXAA00017
• 8mm Socket http://1aau.to/obbk/1AXAA00017
• Trim Tool Set http://1aau.to/oab6/1AXXX00006
• Ratchet http://1aau.to/obBq/1AXAA00016
• Gloves http://1aau.to/o7Q/1AXSS00048
• Safety Glasses http://1aau.to/oY4/1AXAA00343

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.