VICTRON ENERGY SMARTSOLAR CHARGE CONTROLLER MPPT RS 450/100-Tr WITH BLUETOOTH

Maximum charge current: 100 Amp

Maximum DC PV Voltage: 450 V

MPPT operation voltage range: 80-450 V

Number of trackers: 2

Weight: 17.4

Dimensions: 17.3" x 12.3" x 4.96"

Victron Energy SmartSolar MPPT RS is a 48 V Solar charge controller with up to 450 VDC PV input and 100 amp output. It is used in on-grid and off-grid solar applications where maximum battery charging power is required

Victron Energy SmartSolar RS charge controller can be remotely controlled and configured over Bluetooth via the VictronConnect App

Daisy Chain Additional Units: Victron Energy SmartSolar RS charge controller is equipped with VE.Can bus ports. This allows for communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply daisy chained to each other with an RJ45 cable

Victron Energy SmartSolar RS charge controller is equipped with a display on the front panel. The display reads battery volts, charge current and voltages from both array’s individually including instantaneous and total figures and unit status including any possible error codes

Victron Energy SmartSolar RS charge controller is equipped with a programmable relay and options for remote temperature and voltage sensing. The remote input can accept the Victron Energy smallBMS and other types of Victron Energy BMS with allow-to-charge signals

Battery Charger

DC-AC Invertrs

Combined Inverter/Chargers

DC-DC Converters

Isolation Transformers

Batteries

Battery Monitors

Diode and FET Splitters


Specifications:

Charger:

Programmable charge voltage range: Minimum: 36 V, Maximum: 60 V (8)

Charge voltage ‘absorption: Default, 57.6 V (adjustable)

Charge voltage 'float': Default, 2 V (adjustable)

Maximum charge current: 100 A

Battery temperature sensor: Included

Battery voltage sense: Yes

Solar:

Maximum DC PV voltage: 450 V

Start-up voltage: 120 V

MPPT operating voltage range: 80 – 450 V (1)

Number of MPP Trackers: 2

Maximum operational PV input current: 18 A per tracker

PV short circuit current reverse polarity protection (2): 20 A per tracker

Maximum DC output charging power:  4000 W per tracker,  5760 W total

Maximum PV array size per tracker (3): 7200 Wp (450 V x 20 A)

PV Isolation fail level (4): 100 kΩ

General: 

Synchronized Parallel Operation: Yes, up to 25 units with VE.Can

Programmable relay (5): Yes

Protection (6): c, d, e

Data Communications: VE.Direct port, VE.Can port & SmartSolar Bluetooth (7)

Bluetooth frequency: 2402 – 2480 MHz

Bluetooth power: 4dBm

General purpose analog/digital in port: Yes, 2x

Remote on-off: Yes

Operating temperature range: -40 to +60°C (fan assisted cooling)

Humidity (non-condensing): max 95%

Environmental condition: Indoor type 1, conditioned

Suitable for wet locations: No

Pollution degree: PD2

Maximum altitude: 2000m

Over voltage category: OVCII


USE THIS AFFILIATE LINK TO BUY YOUR SOLAR PANELS FROM SANTAN SOLAR:
https://www.santansolar.com/?ref=naswes

USE THIS LINK TO BUY YOUR LITHIUM BATTERIES AND SAVE 5%

BATTERY HOOKUP PROMO CODE
https://batteryhookup.com/discount/jw...