Badlands Winch - How To Program the Remote

If you've replaced or swapped either your remote or your receiver, you will need to reprogram your remote. This procedure should work for other brands that use this type of remote. Champion is one example

1 - Connect the winch to the receiver and to power
2 - Press and Hold the ON/OFF button for 3 seconds until the LED lights solid
3 - Press and Hold the OUT and IN buttons simultaneously for 20 seconds
The LED will flash 20 times and then light solid again
Release the buttons
4 - Press and Hold the IN and Out buttons a second time, this time for 3 seconds
The LED will turn off and then light sold again
5 - The remote is now programmed and will operate the winch

If you try this procedure and it doesn't work, try replacing the batteries

You can find my video about changing the batteries @    • Badlands Winch - How To Change the Ba...  

If you want to replace the remote and Harbor Freight won't replace it under warranty (or you just want an extra) you can find the ordering instructions at https://www.harborfreight.com/parts

part number is 16311 REMOTE TRASMITTER Assembly and the number to call to order is 1-800-444-3353