Pilot RC Matrix! first one in America! Flame out! No Problem!

https://www.bananahobby.com/10-ch-pil...

Jeremy Solt from Banana Hobby Demos the All new Pilot RC Matrix Enjoy!

Features
Extremely lightweight full composite construction, specially designed for outstanding sport flight with 3D performance

Painted outside the mold, eliminating seam lines

Ultra-lightweight landing gear; the 1.8M Predator Sport Jet landing gear can also be used on this 1.8M Matrix

Specially designed for easy turbine access, allowing for speedy installation

Field setup can be completed in seconds thanks to the quick-release mechanisms on the wings, requiring no tools

Single elevator clamp from the top; only a few turns to tighten/loosen the bolt, allowing for easy installation/removal of the stabilizer

Removable wing and elevator for easy transport

Equipment installation board for clear organization of electronic items, with most wires hidden

Pre-installed tubes for stab/rudder extension wires, making installation easy

Specifications
Wingspan1740mm (68.5")
Length1844mm (72.6")
Weight17.5lbs (7.94kg) with 10kg turbine and fuel bag
Included Hardware (ARF)
Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
Pilot-RC electric retracts and electric brakes specific for this model - pre-installed
Servo extension leads
Thrust pipe
2.000ml fuel tank (optional upgrade to fuel bag)
250ml UAT tank
Pre-prepared pushrods with ball links
Servo connector brackets
Pre-glued control horns
8X Pilot-RC high torque servos and extension wires, all pre-installed
Required Hardware (ARF to RTF)
Engine: 060-100NServos: Total x8 medium (size: 35x15x30mm), with the option to install standard servos for the flaps and rudder as well
x2 for flaps (minimum 16kg)
x1 for rudder (minimum 16kg)
x2 for ailerons (minimum 16kg)
x2 for elevators (minimum 16kg)
x1 for steering (minimum 10kg)
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories