DIY homemade roping dummy

Homemade roping dummy made out of 1 inch PVC pipe. Ability to head and heel. Pipe was about $150 from Home Depot. What you need will be listed below. Comment any questions and modifications to make it better.

3 - 10 ft sections of 1 inch PVC (will have extra but better safe than sorry)
1 - 2 ft section of 1 1/4 inch PVC
14 - 1 inch T’s
8 - 1 inch 45 degrees
4 - 1 inch 90 degrees
2 - 1 inch straight connectors
4 - 1 inch caps
2 - 1 1/4 inch T’s
4 - 1 1/4 inch 45 degrees
2 - 1 1/4 inch caps
PVC Glue
Either ten inch bolt and nut or all thread and nuts to keep legs spread.
2 bolts that thread into roping dummy (9/16 head)
1 roping dummy head
Spray paint

Pipe lengths:
7 pipes at 14 inches
4 pipes at 18 inches
8 pipes at 7 inches
6 pipes at 2 inches (for connectors)
4 1 1/14 inch pipes at 4 inches each (for legs)
2 1 1/4 inch pipes at 2 inches each (leg caps)