FUNCTION OF BIT STATE SWITCH AND BIT STATE LAMP NB Designer Omron HMI

DOWNLOADING LINKS ARE GIVEN BELOW...

Bit State Setting
Bit State Setting component defines one touching area. When this area is activated, the bit address inside the HMI or in the PLC can be switched to “On” or “Off” forcefully.


Bit State Switch
Bit State Switch is the combination of the Bit State Lamp and the Bit State Setting component. It defines a touching area, and the bit address inside the HMI or of the PLC can be switched between On and Off state when this area is enabled.

Bit State Lamp
Bit State Lamp displays the On/Off state of bit address inside a specified HMI or of PLC device. If the state is 0, the graphics with state of 0 will be displayed; If the state is 1, the graphics with state of 1 will be displayed. If “Use Tag” is checked, the tag values corresponding to the different states can be set and displayed.


Multiple State Setting
Multiple State Setting component also defines a touching area and the state value will be input into the specified word address when the area is enabled.


Multiple State Switch
Multiple State Switch is the combination of the Multiple State Display component and the Multiple State Setting component. It can display the mapping state according to the value of the specified word address (The mapping state is up to 256 kinds.); and it also defines a touching area at the same time. When this area is touched, the mapping data of the corresponding state will be written into the specified word address. Write address can be same or not same as the read address.

Multiple State Display
Multiple State Display component will display the mapping state according to the value of the specified word address. If the value is 0, the graphics for the state corresponding to value 0 will be displayed; while if the value is 1, the graphics for the state corresponding to value 1 will be displayed and so on. If “Use Tag” is checked, the tag content corresponding to the state will be displayed.

NB Designer HMI Demo examples:-https://www.awztech.org/nb-designer-h...

Please Subscribe for New videos:-https://bit.ly/3Dq3pPh

DOWNLOAD DEMO EXAMPLES:- https://za.gl/N5R2
https://bit.ly/3Bmn5V7

DOWNLOAD SOFTWARES:- https://za.gl/qIVK1Ud
https://bit.ly/3tsAasK



DOWNLOAD SOFTWARES:- https://www.awztech.org/software-down...
NB Designer OMRON HMI Tutorial:- https://bit.ly/2TNm4hr
DOPSOFT DELTA HMI Tutorial:-https://bit.ly/2FMEKKj
:-https://www.awztech.org/delta
Wonderware Intouch Tutorial:-https://bit.ly/2uzKFMi
:-https://www.awztech.org/wonderware-in...
GT Designer MITSUBISHI HMI Tutorial:- https://bit.ly/2I4KuR5
WinCC Siemens HMI Tutorial:-https://bit.ly/36c73iZ
:-https://www.awztech.org/wincc-siemens
FACTORY TALK VIEW Tutorial:-https://bit.ly/3IoDT0s
:-https://www.awztech.org/rockwell

The above video is for educational purposes only for fair use.