Скачать или смотреть Märklin C-Gleis test connection and disconnection of Bartuś&Bacia via wi-fi programmed in Visuino.

Test Märklin C-Gleis connecting and disconnecting short Bartuś&Bacia connectors via WiFi programmed in Visuino.
1. Attempting to connect Bartuś & Bacia with own design of short connectors on R1 bends. The connection is always made irrespective of the direction of the combination of individual wagons. They always "like" each other.
2. Attempt to disconnect at any time in a straight section using a wi-fi signal.
3. Such an original and unique method of joining allows Bartuś to flawlessly transfer the trains from the mock-up to the rails on the floor.
The design and principle of operation is the sole idea of ​​the author and has not been described or demonstrated anywhere.
Märklin C-Gleis with cross and two reversing loops.
Such an arrangement cannot be made in a DCC system due to the interlacing of the rails and the very short distances.
On such a small model, it was possible to assemble a schematic in the C-Gleis system.
The short couplers, which can be quickly disconnected and connected in any combination, are also inspired by Bartuś. And the most important 100% of connections on R1 arcs. They were made and tested by his company Bartuś&Bacia.