Скачать или смотреть The

Link : https://www.aliexpress.com/item/10050...

Compatibility: SCULPFUN S9/S6pro/S6, ATOMSTACK A5/A5Pro, ORTUR(12V Version), ELEKSMAKER or DIY 3D printers, CNC machine
Engraving Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), MDF, Zigzag, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, 304 Stainless Steel, Ceramic, Dark Stone
Cutting Material: All Kinds Of Wood (Including Walnut, Cherry And Other High-Density Wood), Mdf, Acrylic Board, Cardboard, Non-Woven, Bamboo, Leather, Some Plastic Boards, PCB Boards
Circuit Board Size: 40x40mm
Circuit Board: 12V/PWM Modulation Board
Input voltage: 12V
Max Input of laser Module: 12V 5A
Wire Rod: HY2.0, 3Pin Terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan: 12V 0.15A 4020 fan
Fan Speed: 15000 rpm
Operating Temperature: -20 ℃ to 70 ℃
Package weight: 0.85kg/30oz
Packing size: 22.7x13.6x9.5cm/8.9x5.3x3.7in

Tip:
How to judge whether the S10 laser is suitable for use? You need to pay attention that the input voltage of the S10 laser is 12V, and the S10 is a 3pin interface, you can check the detailed pictures.

Note:
● Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
● For detailed machine instructions, please refer to the manual for parameter settings.
● When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
● Do not touch the laser with your hands, otherwise you may burn your hands.
● Please avoid strong impact on the machine.
● It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
● Do not use the laser directly on any specular reflection object, which may cause injury to the operator or burn the laser.