How to Replace Front Lower Control Arm 1996-2002 Toyota 4Runner

Buy Now!
New Control Arm from 1AAuto.com http://1aau.to/ib/1ASLF00528

This video shows you how to install new control arms in your 1996-2002 Toyota 4Runner. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner

Tools you will need:
• Pry Bar http://1aau.to/oQ6/1AXAA00020
• 19mm Wrench http://1aau.to/oTE/1AXAA00010
• 13mm Socket http://1aau.to/obnY/1AXAA00015
• 17mm Socket http://1aau.to/obnY/1AXAA00015
• 19mm Socket http://1aau.to/oadi/1AXAA00043
• 21mm Socket http://1aau.to/oadi/1AXAA00043
• 22mm Socket http://1aau.to/onL/1AXAA00266
• Grease Gun
• Straight Cutters
• 1/2 Inch Impact Gun http://1aau.to/orC/1AXAA00252
• Ratchet http://1aau.to/obv9/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/obnY/1AXAA00015
• Torque Wrench http://1aau.to/oazN/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oWn/1AXSS00048
• Rust Penetrant
• Safety Glasses http://1aau.to/oPx/1AXAA00343
• Silicone Paste
• Floor Jack http://1aau.to/oZr/1AXAA00068
• Hammer http://1aau.to/oR6/1AXAA00091
• Jack Stands http://1aau.to/oQV/1AXAA00065
• Reciprocating Saw
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.