CP PLUS VIDEO DOOR PHONE FITTING

Installing a CP Plus video door phone involves several steps, including planning the installation, wiring, and configuring the device. Below is a comprehensive guide on how to fit a CP Plus video door phone system:

Tools and Materials Needed:

CP Plus video door phone kit (including indoor monitor and outdoor camera)
Power supply (if not included)
Wiring (typically 2-wire or 4-wire, depending on the model)
Drill and drill bits
Screwdriver
Cable ties
Level
Measuring tape
Electrical tape
Wall mount bracket (if required)

Installation Steps:

#### 1. Planning the Installation:
Location of Indoor Monitor: Choose a convenient location for the indoor monitor, typically in an entryway or living room.
Location of Outdoor Camera: Install the outdoor unit at a height that allows for clear visibility of visitors, usually around 1.5 to 1.7 meters from the ground.
Power Supply: Ensure that there is access to a power source for both the indoor monitor and outdoor camera.

#### 2. Wiring:
Select the Wiring Type: Depending on your model, use either 2-wire or 4-wire cabling. The wiring should connect the indoor monitor to the outdoor camera.
Run the Wires:
For the outdoor unit, run wires from the location of the indoor monitor to the outdoor camera location.
If using a power supply, ensure you have appropriate wiring for that as well.
Connect Wires:
For the outdoor camera, connect wires according to the manufacturer's wiring diagram (usually provided in the manual).
Connect wires to the indoor monitor following its wiring diagram.

#### 3. Mounting the Outdoor Camera:
Drill Holes: Use a drill to make holes for mounting screws at the desired height.
Mounting Bracket: If your model requires a mounting bracket, install it first.
Attach Outdoor Unit: Securely attach the outdoor camera unit using screws and ensure it is level.

#### 4. Mounting the Indoor Monitor:
Drill Holes: Drill holes for mounting screws at the chosen location for the indoor monitor.
Attach Indoor Unit: Securely mount the indoor monitor on the wall or surface using screws.
Power Connection: Connect the power supply to the indoor monitor if required.

#### 5. Connecting Power:
If your system requires a separate power supply, connect it according to the manufacturer's instructions. Ensure all connections are secure and insulated with electrical tape if necessary.

#### 6. Configuration:
Power On: Turn on the power supply to both units.
Set Up: Follow the user manual instructions to configure settings such as volume, brightness, and ringtones on the indoor monitor.
Test Functionality: Press the call button on the outdoor unit to test if it rings on the indoor monitor. Ensure that video and audio work properly.

#### 7. Final Checks:
Ensure all connections are secure and that there are no loose wires.
Check that both units are functioning correctly and adjust settings as needed.

Maintenance Tips:

Regularly check connections and clean both units to ensure optimal performance.
Test functionality periodically to ensure everything is working as expected.

Conclusion:

Installing a CP Plus video door phone can enhance security and convenience at your home or business. Following this guide will help you achieve a successful installation. If you encounter any issues or need specific technical support, refer to the user manual or contact CP Plus customer service for assistance.
How to install video door phone with electric lock configuration
For more information feel free to contact us on 9667510195 9341442339
Visit us www.elktroz.com
#elktroz #technology #gateautomation #smartlock #doorlock #viral