Скачать или смотреть How To Clear A Flashforge Ad5x Nozzle And Make Things Worse.

Here’s a fix for nozzle clogs on the AD5X. If you’ve ever had filament snap off in the extruder or just stop feeding for no reason, this might save you from tearing your hair out. Just a screwdriver, a bit of patience, and some low-level panic.

Took the front off, yanked the C-clip, shoved the filament through the wrong way — you know, the usual. Definitely not the official method, but it got the job done without setting anything on fire. So that’s a win.

➕ Tools:

Flashforge AD5X

Filament with trust issues

T8 hex, and a small flathead

A growing sense of “why do I do this?”

💬 Let me know if yours unclogged more gracefully, or if you’ve just given up and bought a new printer.

#AD5X #3DPrinting #Flashforge #FilamentClog #WhyThough
00:00 - The Clog Begins
00:15 - Filament Jammed Inside
00:35 - Trying to Pull from the IFS
01:00 - Removing the C-Clip
01:30 - Clearing the Coupler Clip
02:15 - Pushing Filament Through at 260°C
02:45 - Filament Cleanup and Pull Test
03:30 - Troubleshooting the Nozzle Blockage
04:15 - Removing Screws to Access Clog
04:45 - Clearing the Stuck Filament Piece
05:15 - Reassembling the Extruder
05:45 - Final Test and Wrap-Up