Скачать или смотреть Instant Hot Water Faucet | Unboxing | Demo

Instant Hot Water Faucet | Unboxing | Demo


Low Consumption
Easy to install and operate

Just 3-5 seconds. 30-60 degree hot waler for using

Need not preheat, Provide hot water all the time.

Water is separate from electric.

Absolute safely

With Anti-leakage electric equipment Protection

Water flow switch, to ensure the electricity power is cut off

Fast and efficient, easy to use, water temperature adjustable 30 ° to 60 ° c

Water pressure: 0.04-0.5MPa

Power: 220V

Rated Power: 3000W


Important note
This product is prohibited in outdoor use.

For the first time use, please run water, then plug the power.

The outlet water temperature should be less than 60 degree.

The water outlet shall not be connected to any faucet and any choked flow components.

The nozzle should be cleaned regularly, must disconnect the power when cleaning.

It is strictly prohibited to wash the this electric faucet, to avoid the danger.

*If water freezes in faucet, strictly prohibited to connect to electricity power.

Ensure this faucet connect with earth line, otherwise not use this faucet.

The faucet need water pressure is 0.04MPa-0.5Mpa.

Please turn the knob to cold water area for 5 seconds after each using, to avoid scalding hands when next time use,which also can effectively prevent the occurrence of the incrustant, extend service life of the heating element.
If the power line damaged, must replace the damaged line by the skilled personnel.

When using the electric faucet, do not use other high-power electric appliances (such as air conditioning,induction cooker,electric kettle,ete.)
When connected power line with power, must install one voltage level Ill all-pole disconnection device according to the fixed wiring rules.


Preparation work before installation
Because this faucet power is larger, please check electricity meter, electric brake, fuse, whether there is a switch on the electric circuit. The capacity of these devices should satisfy the need of rated current of faucet.
Make sure there is earth line in the plug base. That is the actual existence of earth line in the plug base.

Before use, please check whether the actual voltage correspond with voltage on the faucet.