Скачать или смотреть Weintek CODESYS HMI as a PROFINET Controller — Setup with Siemens ET200SP & Seneca I/O

LV:
Šajā video soli pa solim redzams, kā Weintek HMI ar CODESYS SoftPLC konfigurēt kā PROFINET IO Controller, pieslēgt Siemens ET200SP un Seneca I/O, ielādēt GSDML failus un pārbaudīt komunikāciju. Parādu arī PRONETA izmantošanu adresācijas iestatīšanai, mainīgo izveidi un EasyBuilder Pro HMI projekta sasaisti ar CODESYS tagiem.

SOFT:
Siemens ET-200 SP GSD 👉
https://support.industry.siemens.com/...
SIEMENS Proneta config tool 👉
https://www.siemens.com/global/en/pro...
Seneca GSD 👉
https://www.seneca.it/en/linee-di-pro...


Satura nodaļas:
00:09 Kā pievienot PROFINET IO ierīces pie Weintek CODESYS PLC
00:15 Izveidojam jaunu CODESYS projektu un pievienojam PROFINET IO Controller (Master)
01:31 Lejupielādējam GSDML (ierīču aprakstus) un pievienojam CODESYS bibliotēkai
03:11 Pievienojam PROFINET IO ierīces CODESYS projektam
05:04 Atveram PRONETA un iestatām tīkla adresi Siemens ET200SP
05:59 Ievadām attiecīgo ET200SP IP projektā un pārbaudām komunikāciju
06:51 Izveidojam dažus mainīgos un mini algoritmu
08:17 Eksportējam CODESYS mainīgo sarakstu un veidojam EasyBuilder Pro projektu

PRODUKTI:
Weintek HMI cMT3072X 👉 https://lasma.eu/lv/produkts/xyNTBnte...
Siemens ET200SP IM 155-6 PN 👉 https://lasma.eu/en/product/rtIhFfhg/...
Siemens DQ 8X24VDC/0,5A ST 👉 https://lasma.eu/en/product/fjXKZbNX/...
Seneca R16DI-8DO 👉 https://lasma.eu/en/product/41iGAgZx/...

Lasi vairāk:
Weintek CODESYS SoftPLC tagad pilnībā atbalsta PROFINET 👉https://lasma.eu/lv/jaunumi/weintek-c...

EN:
In this step-by-step guide I configure a Weintek HMI with CODESYS SoftPLC as a PROFINET IO Controller, connect Siemens ET200SP and Seneca I/O, load GSDML files and validate communication. I also use PRONETA for address assignment, create variables, and link them to an EasyBuilder Pro HMI project.

Chapters:
00:09 Add PROFINET IO devices to a Weintek CODESYS PLC
00:15 New CODESYS project + add PROFINET IO Controller (Master)
01:31 Download GSDML and add to the CODESYS library
03:11 Insert PROFINET IO devices into the project
05:04 Use PRONETA to set ET200SP network address
05:59 Set the ET200SP IP in the project and verify communication
06:51 Create a few variables and a simple demo algorithm
08:17 Export the CODESYS variable list and build the EasyBuilder Pro HMI project


#ztflasma #Weintek #Seneca #Siemens #PROFINET #CODESYS #IndustrialAutomation