How to Use and Troubleshoot your Brybelly Card Shuffler

This How-to video features Brybelly's 6-Deck Automatic Playing Card Shuffler, found here: http://amzn.to/1T3qUjD

---

Hi, I'm Zach with Brybelly. I'd like to show you how to get the most out of your Brybelly card shuffler.

Once you get your shuffler out of its box and the batteries installed, it's pretty easy to use. I've got a deck of blue cards, which I'll put on this side, and a deck of red cards that I'll place on the other.
Go ahead and slide the card tray all the way into your shuffler, and right below it you should see a wide black tab that says, "Press Down to Operate." Well, we're going to follow its instructions. Here we go.

Perfect. Slide out your card tray, and your shuffled cards are ready to play.

TROUBLESHOOTING

In the rare case your shuffler isn't operating properly, it's a pretty easy fix. If one or both sides of your shuffler aren't moving when you press the black operating tab, then your gears probably aren't spinning.

To reposition your gears, just find a long, thin tool around your home, like tweezers, an eyeglass screwdriver, or a pencil.

The number one reason a shuffler stops shuffling is friction. There is a long, thin gear that touches both the motor gear and the thicker, grippy gear that physically moves your playing cards. There are rare cases where this gear gets pushed right up against the side of the grippy gear. This causes friction, and the friction causes all your gears to stop spinning.

Luckily, the fix is simple. Just use your chosen tool to push the long, thin gear off and away from the thick, grippy gear. Once you remove that friction, your shuffler's function should be restored.

And there you have it. Thanks for watching, and enjoy your Brybelly card shuffler.

---

Need to get in touch? Find Brybelly on Social Media:

Facebook:   / brybelly  
Twitter:   / brybelly