Скачать или смотреть DIY: MetalCloak Rocklander & AntiRock full install. 1 Man, Basic tools, 3 Days of Wrenching!!!

No Garage, No Lift, No Help. One man, one jack, Jack stands, and basic hand tools. A complete Suspension upgrade in a 3 day Weekend.

My Jeep previously has, MetalCloak steering, Metal lower control arms, and MetalCloak track bars. I’ve also previously installed the front AntiRock sway bar. So those won’t be covered.

While this is not hard… it was a lot of work being done at the same time. I definitely got tired a few times through. My goal was to do this in a weekend but I ran out of time and needed a 3rd day to finish. In all it wasn’t a bad job but it would been substantially easier with a lift.

-

​⁠‪@metalcloak‬ for the Rocklander Suspension, Driveshaft, and the Drop brackets.
In the future I’ll likely add the DB3 rear drop brackets as well

​⁠‪@RockJock4x4byJohnCurrie‬
Front and rear AntiRock sway bars
I’ll likely have to add longer rods to the rear

​⁠‪@drpepper‬ and a Built bar for lunch
Rocking my ​⁠‪@StackingPenniesPerformance‬ Tshirt from ​⁠‪@Corey_LaJoie‬

-

#diy #jeep #liftkit #metalcloak #antirock #drpepper #builtbar

00:00 intro
00:30 Measurements Before
02:05 Measurements After
02:38 Rear Sway bar
08:40 Rear Suspension
10:20 Deadly Coil Spring Compressor Failure
13:00 Rear Suspension continued
16:27 Dr Pepper and a Built Bar
18:20 Front Suspension
25:30 behind the scenes
27:12 Drop brackets: ProLignment
31:52 Driveshaft
36:15 test drive
37:26 Adjustments
41:08 Takeaways