Elite II Install Hall joystick demonstration。

Hello friends, many friends asked me if it can be used on the Elite 2 controller, and my answer is yes! Due to the complex structure of the control, it will be a little different from ordinary installation. I think there are mainly four points to pay attention to:
1: The left joystick needs to be tilted a little instead of being installed directly.
2: The plastic of the LT button will press against the circuit board, so you need to use a knife to cut off the conflicting part.
3: The LT trigger sensor needs to be removed and then slightly raised when reinstalling.
4: I used an ordinary joystick. The threaded Hall joystick will have size incompatibility issues, so please use it with caution.
The above is what I think requires extra attention. Other than that, it is no different from ordinary XBOX controller installation. After replacing it, you will get an excellent center dead zone, far better than the original joystick!
There are some other things. Due to EU procedures, AliExpress has removed my products from the EU. I am still preparing for the procedures and will restore them as soon as possible.
Installation manual: https://drive.google.com/drive/folder...