How to Replace Inner Tie Rod 2001-2007 Toyota Highlander

Buy Now!
New Tie Rod Set from 1AAuto.com http://1aau.to/ia/1ASFK03695
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE00726

The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2001-2007 Toyota Highlander.

This repair was done on a 2007 Toyota Highlander Base 3.3L Sport Utility 4-Door and the process should be similar on the following vehicles:
2001 Toyota Highlander
2002 Toyota Highlander
2003 Toyota Highlander
2004 Toyota Highlander
2005 Toyota Highlander
2006 Toyota Highlander
2007 Toyota Highlander

Tools you will need:
• Pry Bar http://1aau.to/obb/1AXAA00020
• 19mm Wrench http://1aau.to/oba/1AXAA00010
• 22mm Wrench
• 1/2 Inch Impact Socket Set http://1aau.to/oa/1AXAA00263
• 1/2 Inch Impact Socket Set http://1aau.to/oa/1AXAA00264
• 17mm Socket http://1aau.to/oe4/1AXAA00015
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 22mm Socket http://1aau.to/oI/1AXAA00266
• Inner Tie Rod Removal Tool http://1aau.to/oh/1AXAA00438
• Locking Pliers http://1aau.to/oM/1AXAA00139
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun http://1aau.to/oN/1AXAA00252
• 1/2 Inch Breaker Bar http://1aau.to/oW/1AXAA00078
• 3/8 Inch Drive Ratchet http://1aau.to/oe4/1AXAA00015
• Socket Driver
• Torque Wrench http://1aau.to/ocU/1AXAA00044
• Copper Anti-Seize
• Gloves http://1aau.to/o2/1AXSS00048
• Safety Glasses
• Wire Ties
• Center Punch http://1aau.to/oH/1AXAA00055
• Hammer
• Rubber Mallet

Subscribe:    / @trq  

Check out our playlist:
2001-2007 Toyota Highlander 1st Generation:    • 2001-2007 Toyota Highlander 1st Gener...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.