🔧iPhone 11 Glass Replacement - Restoration guide 4K 🖥

Follow this:
1. Take off the screen module using thin metal blade (slowly, You can help with a drop of isopropanol)
2. Remove Face ID module on the top and back metal cover of LCD (don't mistake the screws!)
3. Cut the frame on the top and take it off on the sides (heat the screen for 100*C)
4. Cut off the glass with 0.04 molybdenum wire
5. Clean the rest of glue with rotating wire or using yours fingers (still heating the LCD)
6. Precisely clean the screen with isopropanol and anti dust wipe
7. Gently connect the screen with new glass (if You don't have glass with OCA glue, You have to put it on the glass by yourself)
8. Laminate on the polyuretan mat on 4bar and 50*C
9. Then autoclave in 50*C for 10 minutes
10. Mount the screen module again
Can't use LOCA glue in this model!!! You will destroy backlight on LCD. You can use LOCA on iPhone 11 Pro and 11 Pro Max (OLED screens)

My equipment:
◉Glass cutting wire: http://bit.ly/3GiwqkH
◉Heat plate (glass separator): http://bit.ly/3hNAe47
◉UV Lamp: http://bit.ly/3GiVLLw
◉Glass cutting machine: http://bit.ly/3PTnTaU
◉Glue remover: http://bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): http://bit.ly/3hX7WUC
◉Big autoclave: http://bit.ly/3GdQTHj
◉360° Separator: http://bit.ly/3Gr6409

➥Our service official website: http://jerrymobile.pl

Join my page👍
  / jerrymobilepl  

Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜

Track: Elektronomia & RUD - Memory [NCS Release]
Music provided by NoCopyrightSounds.
Watch:    • Elektronomia & RUD - Memory | House |...  
Free Download / Stream: http://ncs.io/Memory