RadRunner Plus Assembly Instructions | Rad Tech

Follow these instructions to assemble the RadRunner Plus electric utility bike. Be sure to perform all safety checks in the owner’s manual including a handlebar twist test, ensuring the front wheel is properly secured, and all parts are tightened and torqued properly.

Depending on when your bike was manufactured, you might still receive an ebike with a quick release axle, in which case use the instruction found in this video and your owners manual. If you received an ebike with a bolt-on axle, follow the installation steps in the link below, in place of the front wheel installation steps described in the assembly video and your Owner’s Manual. All ebikes come with Quick Release skewer to secure the fork protector plate during shipping, but it will not be required for assembly if you have a bolt-on axle.
This link will also help you determine which type of axle is on your front wheel if you are unsure: https://support.radpowerbikes.com/Mai...

Some RadRunner Plus ebikes come with the passenger seat not yet installed on the rear rack. If your RadRunner Plus came packaged that way, follow the directions in the RadRunner Passenger Package Installation Guide to install your passenger seat. You can skip the steps for installing the foot pegs and the wheel skirts, which come pre-installed on your RadRunner Plus.
https://support.radpowerbikes.com/Acc...

Download the latest version of your owner’s manual at https://www.radpowerbikes.com/manual

Get help from a local, reputable bike shop if needed, and contact Rad Power Bikes Product Support if you have any questions.
https://www.radpowerbikes.com/help