Скачать или смотреть new carbide button 20mm*10*18mm 42.2g/pcs

new carbide button 20mm*10*18mm 42.2g/pcs #carbidetools
Email:[email protected] whatsapp: 0086-13673135372
Application
Tungsten carbide button is often used as drilling tools for shearers and mining machinery tools. They can also be used in heavy excavator bits.
Grade Equal to ISO Category Number Density (G/cm3) Hardness (HRA) Bend Strength (TRS/N/mm2)
Feature
Tungsten carbide button has high wear resistance and impact toughness, and has higher drilling speed than similar products. Tungsten carbide button bit has a long service cycle of passivation, and its non-grinding life is about 5-6 times of the grinding life of the same diameter drill bit, which is conducive to saving auxiliary working hours, reducing physical labor of workers and speeding up the project efficiency.
YG6 15.00 90 1700 Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations.
YG8 14.7 88.5 2200 Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations.
YG8C 14.7 88.0 2300 Mainly used as the buttons of small and medium-sized percussion bits and as the inserts of rotary prospecting bits to cut soft, medium-hard formations.
YG9C 14.50 87.0 2400 Maily used as the inserts and buttons for rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations.
YG11C 14.40 86.5 2450 Chiefly for the inserts and burtons of heavy rock drill bits and rotary-percussive bits, coal-cutting bits and tricone bits to cut medium-hard and hard formations.


Part1 0:00-0:52 overview
Part2 0:52-2:06