4th Gen Floor Console in 3rd Gen Ram - Rough In

Описание к видео 4th Gen Floor Console in 3rd Gen Ram - Rough In

Tools:
•1/2" or 13mm offset box wrench or passthrough sockets - these are for the 6 bolts holding in the jump seat. There's little to no clearance for a rachet *unless you have a pass through set.

•7mm socket - this is to remove the screws that hold the sides on to the superstructure.

•TT20 Torque head - this is for the screws in to the sides from inside the storage box

•Saw or cutting disk - I used a rotary saw with a wood blade because it was handy, but just about any power saw would work provided you have a steady hand and a are able to steady the side panels.

Комментарии

Информация по комментариям в разработке