Viper (Off-ride HD) Six Flags Magic Mountain

Описание к видео Viper (Off-ride HD) Six Flags Magic Mountain

Buy Me a Coffee! - https://buymeacoffee.com/coastercrutc... Offride / RAW footage of Viper at Six Flags Magic Mountain in Valencia, CA. Watch in Full HD 1080p!

-Help support new videos on Patreon:   / coastercrutchfield  
-Like our Facebook page:   / coastercrutch  

Equipment I use:
-POV Camera (for newer videos): https://amzn.to/2WJAQZx
-Offride Camera: Sony HDR-CX550v
-Editing Computer: https://amzn.to/36xzIN5
-Editing Software: https://amzn.to/2CoL6ND

Opened: April 7, 1990
Cost: $8,000,000
Type: Steel
Manufacturer: Arrow Dynamics
Model: Custom Looping Coaster
Track layout: steel
Lift/launch system: Chain lift hill
Height: 188 ft
Drop: 171 ft
Length: 3,830 ft
Max speed: 70 mph
Inversions: 7
Duration: 2:30
Max vertical angle: 50°
Capacity : 1700 riders per hour
Max G force: 4.1
Height restriction: 4 ft 6 in

Upon exiting the station, the train immediately begins climbing the 188-foot (57 m) lift hill. Upon reaching the top, the train curves into the 171-foot (52 m) drop, entering the 140-foot (43 m) tall vertical loop. The train then turns a sharp left, entering two vertical loops and then climbing into the mid-course break run, followed by a zig-zag into the batwing (two connected diving loops, each is a mirror image of the other). Riders are photographed by the on-ride camera in the middle of this element. Riders then make a right turn and immediately enter the double-corkscrew, followed by flat track and two turns before hitting the final break run, then making a final turn before returning to the station.

Viper is the last of the three 7-looper roller coasters built by Arrow Dynamics to remain operating.

Disclaimer: Some of the links listed above are affiliate links, which means that I may earn a commission if you click on the link or make a purchase using the link. When you make a purchase, the price you pay will be the same whether you use the affiliate link or go directly to the vendor’s website using a non-affiliate link. By using the affiliate links, you are helping support us and I genuinely appreciate your support.

Комментарии

Информация по комментариям в разработке