How To Replace Wheel Bearing & Hub 2007-2011 Toyota Camry

Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com https://trq.video/ia-1ASHS00948

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2007-2011 Toyota Camry.

This repair was done on a 2011 Toyota Camry LE 2.5L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry

Tools you will need:
• Pry Bar https://trq.video/oaS-1AXAA00020
• 22mm Wrench
• 10mm Socket https://trq.video/odu-1AXAA00017
• 17mm Socket https://trq.video/od3-1AXAA00015
• 21mm Socket
• 22mm Socket https://trq.video/oF-1AXAA00266
• 30mm 12-Point Socket https://trq.video/oc-1AAST00002
• Brake Caliper Hanger https://trq.video/or-1AXAA00439
• Press
• Side Cutters
• Snap Ring Pliers
• Torque Wrench https://trq.video/ocj-1AXAA00044
• Liquid Thread Locker
• Rust Penetrant
• Hammer

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.